Acerca de

IMG_2129_edited_edited_edited.jpg

How to Secure your iPhone and Safely Lock it in the ProShotCase

Properly and safely securing your iPhone in the ProShotCase ensures that no issues or leaks occur when using your case underwater. Please make sure that you follow these steps to ensure your iPhone is protected and covered within our iPhone Protection Guarantee

Step 1 Sliding Insert Instructions: The sliding insert has a spring-loaded clamp where the iPhone will attach.
You will need to remove the sliding insert from the outer case, insert the iPhone into the clamp on the sliding insert.

 

iPhone 12_12Pro in insert_lying flat_correct.jpeg
iPhone 12_12Pro in insert_correct.jpeg

Step 2.  Then align your volume buttons to the volume buttons on the insert, then slide the insert back into the case. The iPhone's volume buttons MUST line up with the volume buttons on the sliding insert. Our ProShotCase app (required for all underwater photography) interacts with your iPhone's volume buttons making it essential they connect.

 

Step 3. Necessary - make sure to open the ProShotCase App on your phone BEFORE inserting your phone into the outer case! You cannot interact with your touchscreen once you insert your phone into the case.

End Cap for ProShotCase for iPhone 12/12 Pro and ProShotCase for iPhone 11 Pro Max, 11, XR, & XS Max.

After inserting your iPhone and sliding insert into the case, hook the right side of the end cap to the case body and secure the left side with the blue latch, similar to a mason jar.

End Cap for ProShotCase for iPhone 11 Pro, XS & X.

The End Cap is already attached to the sliding insert; attach the blue side pieces of the sliding insert to the side clips on the case body by pulling the black "Open" tabs up and clicking both down into the insert side pieces.

End Cap for ProShotCase for iPhone SE 2022, SE 2020, 6/7/8, and ProShotCase for iPhone 6/7/8 PLUS.

The end cap is already attached to the sliding insert; hook the right side of the end cap to the case body and properly secure the left side with the blue latch, similar to a mason jar.

Step 4Double check that the end cap is secured and properly attached to the outer case body. 

Step 5. Once all is properly secured, you're ready to go to film your awesome underwater shots!

After Care for your ProShotCase

Here are a few care tips that we recommend following after each use to keep your ProShotCase in great condition so your underwater footage is the best quality. 

 

  •  Rinse your ProShotCase with fresh water after every use and let it air dry. This will remove any salt residue on your lens area and will keep your seals and gaskets clean from sand so they remain in tact and watertight. 
     

  • If needed, rub toothpaste on the exterior lens area to clean your lens on your ProShotCase.
     

  • Always store your ProShotCase in the Travel Case face down to prevent any damage to the touch film.
    *Please refer to the photo below for how to store the ProShotCase correctly.

 

proshotcase.jpg

Questions?

Our customer service team is always here to  help!

email: info@proshotcase.com

tel: 781 427 7278